These products are currently available via the store to flat rate ship to the continental US only. If you are outside of this area please contact duf@eucarmy.com to get an accurate estimate on shipping cost. Please make sure to check your JUNK MAIL or SPAM FOLDER if you fail to receive an order confirmation email. Customer stand pictures!!Want to see where the stands are made?
Designed to protect light/button area of 16X in a crash.
Two screws included
Screw mount requires drilling two small holes into your case!
Filament used - 18 meters
Print time total - 5 hours
Designed to protect light/button area of 16X in a crash.
Two screws included
Screw mount requires drilling two small holes into your case!
Filament used - 18 meters
Print time total - 5 hours
High quality Hanes, pre-shrunk tagless navy blue cotton shirt.
Sizes small through extra large.
Only shipping to US with standard shipping.
Overseas orders please contact duf@eucarmy for a shipping quote.
High quality Hanes, pre-shrunk tagless navy blue cotton shirt.
Sizes small through extra large.
Only shipping to US with standard shipping.
Overseas orders please contact duf@eucarmy for a shipping quote.
New thicker core for better strength!
If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
Black PLA -Front Kickstand - Fits KingSong 18L or 18XL
Keep your existing mudguard!
Dimensions - 7.6CM wide
Filament used - 38 meters
Print time total - 11 hours
New thicker core for better strength!
If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
Black PLA -Front Kickstand - Fits KingSong 18L or 18XL
Keep your existing mudguard!
Dimensions - 7.6CM wide
Filament used - 38 meters
Print time total - 11 hours
Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
Double sided tape and screws included
Screw mount requires drilling into your case!
Kickstand and "bumper" protection
Filament used - 18 meters
Print time total - 5 hours
Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
Double sided tape and screws included
Screw mount requires drilling into your case!
Kickstand and "bumper" protection
Filament used - 18 meters
Print time total - 5 hours
New thicker core for better strength!
If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
Black PLA - Integrated Kickstand - Fits KingSong 18L or 18XL
Version 1.7 has additional reinforcement at mounting holes and a flat top.
Dimensions - 9.2CM tall x 7.6CM wide
Filament used - 37 meters
Print time total - 11 hours
New thicker core for better strength!
If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
Black PLA - Integrated Kickstand - Fits KingSong 18L or 18XL
Version 1.7 has additional reinforcement at mounting holes and a flat top.
Dimensions - 9.2CM tall x 7.6CM wide
Filament used - 37 meters
Print time total - 11 hours
Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection
Filament used - 25 meters
Print time total - 6 hours
Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection
Filament used - 25 meters
Print time total - 6 hours
Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection with an integrated mini mudguard!
Filament used - 27 meters
Print time total - 7 hours
Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection with an integrated mini mudguard!
Filament used - 27 meters
Print time total - 7 hours
Narrow version with 15CM Opening - Best all around choice to fit most wheels (Not 16X, Z10, Sherman or KS14 Series)
Total print time - 22 hours
Filament used - 79 meters
Narrow version with 15CM Opening - Best all around choice to fit most wheels (Not 16X, Z10, Sherman or KS14 Series)
Total print time - 22 hours
Filament used - 79 meters
Ultra Narrow version with 13.3CM Opening - Best for narrow wheels like KingSong 14 Series or Ninebot S
Total print time - 22 hours
Filament used - 79 meters
Ultra Narrow version with 13.3CM Opening - Best for narrow wheels like KingSong 14 Series or Ninebot S
Total print time - 22 hours
Filament used - 79 meters
"Pinstripe" version. Text has contrasting white background
Narrow version with 15CM Opening - Best all around choice to fit most wheels (Not 16X, Z10 or KS14 Series)
Total print time - 22 hours
Filament used - 79 meters
"Pinstripe" version. Text has contrasting white background
Narrow version with 15CM Opening - Best all around choice to fit most wheels (Not 16X, Z10 or KS14 Series)
Total print time - 22 hours
Filament used - 79 meters
Should fit any V3 or newer Msuper generation!
(Can fit Gotway RS with velcro install!)
Made of FLEXIBLE but tough TPU material that absorbs impact better!
Double sided tape and screws included
Flexible material does not function well as a stand.
Screw mount requires drilling into your case!
"Bumper" protection
"Crashed going 40mph shortly after lol. -Wheel bounced and cartwheeled about 200 feet long 6 foot high.
The bumper absolutely saved the euc, this was about a month ago and I am finally printing a new one rn. The tpu absorbed a lot of impact and even shattered in some spots. Thanks!"
Should fit any V3 or newer Msuper generation!
(Can fit Gotway RS with velcro install!)
Made of FLEXIBLE but tough TPU material that absorbs impact better!
Double sided tape and screws included
Flexible material does not function well as a stand.
Screw mount requires drilling into your case!
"Bumper" protection
"Crashed going 40mph shortly after lol. -Wheel bounced and cartwheeled about 200 feet long 6 foot high.
The bumper absolutely saved the euc, this was about a month ago and I am finally printing a new one rn. The tpu absorbed a lot of impact and even shattered in some spots. Thanks!"
Should fit any V3 or newer Msuper generation!
(Can fit Gotway RS with velcro install!)
Made of FLEXIBLE but tough TPU material that absorbs impact better! Minor imperfections normal with this material.
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection with an integrated mini mudguard!
Filament used - 27 meters
Print time total - 7 hours
Should fit any V3 or newer Msuper generation!
(Can fit Gotway RS with velcro install!)
Made of FLEXIBLE but tough TPU material that absorbs impact better! Minor imperfections normal with this material.
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection with an integrated mini mudguard!
Filament used - 27 meters
Print time total - 7 hours
Should fit any V3 or newer Msuper generation!
(Can fit Gotway RS with velcro install!)
Made of FLEXIBLE but tough TPU material that absorbs impact better! Minor imperfections normal with this material.
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection with an integrated mini mudguard!
Filament used - 27 meters
Print time total - 7 hours
Should fit any V3 or newer Msuper generation!
(Can fit Gotway RS with velcro install!)
Made of FLEXIBLE but tough TPU material that absorbs impact better! Minor imperfections normal with this material.
Double sided tape and screws included
Screw mount requires drilling into your case!
"Bumper" protection with an integrated mini mudguard!
Filament used - 27 meters
Print time total - 7 hours
Email duf@eucarmy.com with your custom text you want on the cross bar of the stand! Maximum of 10 characters Custom stands require at least an additional 5 days to be modeled and built.
Email duf@eucarmy.com with your custom text you want on the cross bar of the stand! Maximum of 10 characters Custom stands require at least an additional 5 days to be modeled and built.
Bolt together for ultimate stability! Wide 20CM opening specifically made for a wide EUC like the Z10, Veteran Sherman and 16X!
Filament used - 134 meters
Print time total - 46 hours
Bolt together for ultimate stability! Wide 20CM opening specifically made for a wide EUC like the Z10, Veteran Sherman and 16X!
Filament used - 134 meters
Print time total - 46 hours
Fits MOST wheels EXCEPT S18 and Gotway EX
Our first ADJUSTABLE stand adjusts to following widths
Adjustable ANYWHERE between 14CM - 20.5CM
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Fits MOST wheels EXCEPT S18 and Gotway EX
Our first ADJUSTABLE stand adjusts to following widths
Adjustable ANYWHERE between 14CM - 20.5CM
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Our first ADJUSTABLE stand adjusts to following widths
Adjustable ANYWHERE between 14CM - 20.5CM
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Our first ADJUSTABLE stand adjusts to following widths
Adjustable ANYWHERE between 14CM - 20.5CM
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Our first ADJUSTABLE stand that should fit almost ANY EUC.
Adjustable ANYWHERE between 14CM - 20.5CM
Tall Boy sides to fit SUSPENSION wheels as well
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Our first ADJUSTABLE stand that should fit almost ANY EUC.
Adjustable ANYWHERE between 14CM - 20.5CM
Tall Boy sides to fit SUSPENSION wheels as well
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Email duf@eucarmy.com with your custom text
you want on the cross bar of the stand!
Pick TALL BOY side option to support S18 or V11 wheels!
Maximum of 10 characters Custom stands require
at least an additional 5 days to be modeled and built.
Our first ADJUSTABLE stand adjusts to
anywhere between 14CM and 20.5CM
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Email duf@eucarmy.com with your custom text
you want on the cross bar of the stand!
Pick TALL BOY side option to support S18 or V11 wheels!
Maximum of 10 characters Custom stands require
at least an additional 5 days to be modeled and built.
Our first ADJUSTABLE stand adjusts to
anywhere between 14CM and 20.5CM
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Our first ADJUSTABLE stand that should fit almost ANY EUC.
Adjustable ANYWHERE between 14CM - 20.5CM
Tall Boy sides to fit SUSPENSION wheels as well
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Our first ADJUSTABLE stand that should fit almost ANY EUC.
Adjustable ANYWHERE between 14CM - 20.5CM
Tall Boy sides to fit SUSPENSION wheels as well
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Uses EXTREME font!
Our first ADJUSTABLE stand that should fit almost ANY EUC.
Adjustable ANYWHERE between 14CM - 20.5CM
Tall Boy sides to fit SUSPENSION wheels as well
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
Uses EXTREME font!
Our first ADJUSTABLE stand that should fit almost ANY EUC.
Adjustable ANYWHERE between 14CM - 20.5CM
Tall Boy sides to fit SUSPENSION wheels as well
Stainless steel bolts, nuts, and "dog ears" for ultimate stability!
Should be used on a hard surface!
Printed on the Prusa MK3S printer! Quality is superb.
Print time total - 33 hours
