ATTENTION – Click here to see what stands work for your wheel!

These products are currently available via the store to flat rate ship to the continental US only.  If you are outside of this area please contact duf@eucarmy.com to get an accurate estimate on shipping cost.  Please make sure to check your JUNK MAIL or SPAM FOLDER if you fail to receive an order confirmation email.   Customer stand pictures!!  Want to see where the stands are made?

View 10 25 50 Showing 1-10 of 24 Results
View Cart Product successfully added to your cart.
  • Shipping Only

    Shipping Only

    $7.55
    Only use when instructed
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    Shipping Only

    Shipping Only

    $7.55
    Only use when instructed

    Shipping Only

    $7.55
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • 2.X or 3.X Wide Bottom Upgrade

    2.X or 3.X Wide Bottom Upgrade

    $12.99
    WIDE BOTTOM SECTION PARTS ONLY
    Make your stand fit newer, wider EUCs!
    ONLY includes two wider 2.X or 3.X bottom pieces along with hardware
    Printed in black, to complement all other colors
    Wider base fits wheels like the 16X, Sherman, and Begode EXN
    2.X or 3.X Wide Bottom Upgrade

    2.X or 3.X Wide Bottom Upgrade

    $12.99
    WIDE BOTTOM SECTION PARTS ONLY
    Make your stand fit newer, wider EUCs!
    ONLY includes two wider 2.X or 3.X bottom pieces along with hardware
    Printed in black, to complement all other colors
    Wider base fits wheels like the 16X, Sherman, and Begode EXN

    2.X or 3.X Wide Bottom Upgrade

    $12.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • KingSong 16X Nose Guard

    KingSong 16X Nose Guard

    $14.99
    Designed to protect light/button area of 16X in a crash.
    Two screws included
    Screw mount requires drilling two small holes into your case!
    Filament used - 18 meters
    Print time total - 5 hours
    KingSong 16X Nose Guard

    KingSong 16X Nose Guard

    $14.99
    Designed to protect light/button area of 16X in a crash.
    Two screws included
    Screw mount requires drilling two small holes into your case!
    Filament used - 18 meters
    Print time total - 5 hours

    KingSong 16X Nose Guard

    $14.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • King Song 18L Kickstand XL Black THICK

    King Song 18L Kickstand XL Black THICK

    $16.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA -Front Kickstand - Fits KingSong 18L or 18XL
    Keep your existing mudguard!
    Dimensions - 7.6CM wide
    Filament used - 38 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    1 Left in Stock
    King Song 18L Kickstand XL Black THICK

    King Song 18L Kickstand XL Black THICK

    $16.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA -Front Kickstand - Fits KingSong 18L or 18XL
    Keep your existing mudguard!
    Dimensions - 7.6CM wide
    Filament used - 38 meters
    Print time total - 11 hours

    King Song 18L Kickstand XL Black THICK

    $16.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Gotway MSuper Nose Stand

    Gotway MSuper Nose Stand

    $16.99
    Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    Kickstand and "bumper" protection
    Filament used - 18 meters
    Print time total - 5 hours
    Gotway MSuper Nose Stand

    Gotway MSuper Nose Stand

    $16.99
    Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    Kickstand and "bumper" protection
    Filament used - 18 meters
    Print time total - 5 hours

    Gotway MSuper Nose Stand

    $16.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • King Song 18L Mudguard - Kickstand THICK Black

    King Song 18L Mudguard - Kickstand THICK Black

    $16.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA - Integrated Kickstand - Fits KingSong 18L or 18XL
    Version 1.7 has additional reinforcement at mounting holes and a flat top.
    Dimensions - 9.2CM tall x 7.6CM wide
    Filament used - 37 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    1 Left in Stock
    King Song 18L Mudguard - Kickstand THICK Black

    King Song 18L Mudguard - Kickstand THICK Black

    $16.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA - Integrated Kickstand - Fits KingSong 18L or 18XL
    Version 1.7 has additional reinforcement at mounting holes and a flat top.
    Dimensions - 9.2CM tall x 7.6CM wide
    Filament used - 37 meters
    Print time total - 11 hours

    King Song 18L Mudguard - Kickstand THICK Black

    $16.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Gotway MSuper Rear Bumper

    Gotway MSuper Rear Bumper

    $16.99
    Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    "Bumper" protection
    Filament used - 25 meters
    Print time total - 6 hours
    Gotway MSuper Rear Bumper

    Gotway MSuper Rear Bumper

    $16.99
    Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    "Bumper" protection
    Filament used - 25 meters
    Print time total - 6 hours

    Gotway MSuper Rear Bumper

    $16.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Gotway MSuper Rear Bumper with Mini Mudguard

    Gotway MSuper Rear Bumper with Mini Mudguard

    $18.99
    Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    "Bumper" protection with an integrated mini mudguard!
    Filament used - 27 meters
    Print time total - 7 hours
    Gotway MSuper Rear Bumper with Mini Mudguard

    Gotway MSuper Rear Bumper with Mini Mudguard

    $18.99
    Should fit any V3 or newer Msuper generation! (Does NOT fit Gotway RS!)
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    "Bumper" protection with an integrated mini mudguard!
    Filament used - 27 meters
    Print time total - 7 hours

    Gotway MSuper Rear Bumper with Mini Mudguard

    $18.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Sherman Full Face Headlight Helmet (FFHH)

    Sherman Full Face Headlight Helmet (FFHH)

    $19.99
    Protect the headlight of your Veteran Sherman with a Full Face Headlight Helmet!
    Printed in super tough TPU!
    Email duf@eucarmy.com for your request or print your own using files posted on Thingiverse!
    Sherman Full Face Headlight Helmet (FFHH)

    Sherman Full Face Headlight Helmet (FFHH)

    $19.99
    Protect the headlight of your Veteran Sherman with a Full Face Headlight Helmet!
    Printed in super tough TPU!
    Email duf@eucarmy.com for your request or print your own using files posted on Thingiverse!

    Sherman Full Face Headlight Helmet (FFHH)

    $19.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • EUC Stand 2.1

    EUC Stand 2.1

    $22.99
    Narrow version with 15CM Opening - Good choice to fit most "normal" width/height wheels (NOT 16X, Z10, Sherman, Monster Pro, EX, EXN, V11, S18 or KS14 Series)
    Total print time - 22 hours
    Filament used - 79 meters
    EUC Stand 2.1

    EUC Stand 2.1

    $22.99
    Narrow version with 15CM Opening - Good choice to fit most "normal" width/height wheels (NOT 16X, Z10, Sherman, Monster Pro, EX, EXN, V11, S18 or KS14 Series)
    Total print time - 22 hours
    Filament used - 79 meters

    EUC Stand 2.1

    $22.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
1
2 3