ATTENTION – Click here to see what stands work for your wheel!

These products are currently available via the store to flat rate ship to the continental US only.  If you are outside of this area please contact duf@eucarmy.com to get an accurate estimate on shipping cost.  Please make sure to check your JUNK MAIL or SPAM FOLDER if you fail to receive an order confirmation email.   Customer stand pictures!!

Looking for a sweet  mudguard, side pads or other mods for your Gotway wheel?

View 10 25 50 Showing 1-10 of 31 Results
View Cart Product successfully added to your cart.
  • Shipping Only

    Shipping Only

    $7.55
    Only use when instructed
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    Shipping Only

    Shipping Only

    Only use when instructed
    $7.55

    Shipping Only

    $7.55
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • King Song 18L Kickstand XL Black THICK

    King Song 18L Kickstand XL Black THICK

    $16.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA -Front Kickstand - Fits KingSong 18L or 18XL
    Keep your existing mudguard!
    Dimensions - 7.6CM wide
    Filament used - 38 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    2 Left in Stock
    King Song 18L Kickstand XL Black THICK

    King Song 18L Kickstand XL Black THICK

    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA -Front Kickstand - Fits KingSong 18L or 18XL
    Keep your existing mudguard!
    Dimensions - 7.6CM wide
    Filament used - 38 meters
    Print time total - 11 hours
    $16.99

    King Song 18L Kickstand XL Black THICK

    $16.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Gotway MSuper Nose Stand Galaxy Black

    Gotway MSuper Nose Stand Galaxy Black

    $16.99
    Should fit any V3 or newer Msuper generation!
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    Printed in premium Prusament
    Kickstand and "bumper" protection
    Filament used - 38 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    3 Left in Stock
    Gotway MSuper Nose Stand Galaxy Black

    Gotway MSuper Nose Stand Galaxy Black

    Should fit any V3 or newer Msuper generation!
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    Printed in premium Prusament
    Kickstand and "bumper" protection
    Filament used - 38 meters
    Print time total - 11 hours
    $16.99

    Gotway MSuper Nose Stand Galaxy Black

    $16.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • King Song 18L Mudguard - Kickstand THICK Black

    King Song 18L Mudguard - Kickstand THICK Black

    $16.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA - Integrated Kickstand - Fits KingSong 18L or 18XL
    Version 1.7 has additional reinforcement at mounting holes and a flat top.
    Dimensions - 9.2CM tall x 7.6CM wide
    Filament used - 37 meters
    Print time total - 11 hours
    OUT OF STOCK
    King Song 18L Mudguard - Kickstand THICK Black

    King Song 18L Mudguard - Kickstand THICK Black

    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Black PLA - Integrated Kickstand - Fits KingSong 18L or 18XL
    Version 1.7 has additional reinforcement at mounting holes and a flat top.
    Dimensions - 9.2CM tall x 7.6CM wide
    Filament used - 37 meters
    Print time total - 11 hours
    $16.99
    OUT OF STOCK

    King Song 18L Mudguard - Kickstand THICK Black

    $16.99
    OUT OF STOCK
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • King Song 18L Mudguard - Kickstand THICK Black PETG

    King Song 18L Mudguard - Kickstand THICK Black PETG

    $19.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Galaxy Black PETG (better strength) - Integrated Kickstand - Fits KingSong 18L or 18XL
    Dimensions - 9.2CM tall x 7.6CM wide
    Filament used - 37 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    1 Left in Stock
    King Song 18L Mudguard - Kickstand THICK Black PETG

    King Song 18L Mudguard - Kickstand THICK Black PETG

    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    Galaxy Black PETG (better strength) - Integrated Kickstand - Fits KingSong 18L or 18XL
    Dimensions - 9.2CM tall x 7.6CM wide
    Filament used - 37 meters
    Print time total - 11 hours
    $19.99

    King Song 18L Mudguard - Kickstand THICK Black PETG

    $19.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • King Song 18L Kickstand XL Black THICK PETG

    King Song 18L Kickstand XL Black THICK PETG

    $19.99
    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    STRONGER Black PETG -Front Kickstand - Fits KingSong 18L or 18XL
    Keep your existing mudguard!
    Dimensions - 7.6CM wide
    Filament used - 38 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    2 Left in Stock
    King Song 18L Kickstand XL Black THICK PETG

    King Song 18L Kickstand XL Black THICK PETG

    New thicker core for better strength!
    If you drop your wheel on a regular basis, this add on is not for you as it could break if struck with enough force.
    STRONGER Black PETG -Front Kickstand - Fits KingSong 18L or 18XL
    Keep your existing mudguard!
    Dimensions - 7.6CM wide
    Filament used - 38 meters
    Print time total - 11 hours
    $19.99

    King Song 18L Kickstand XL Black THICK PETG

    $19.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Gotway MSuper Nose Stand Galaxy Black PETG

    Gotway MSuper Nose Stand Galaxy Black PETG

    $19.99
    Should fit any V3 or newer Msuper generation!
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    Printed in stronger premium Prusament PETG
    Kickstand and "bumper" protection
    Filament used - 38 meters
    Print time total - 11 hours
    Maximum quantity exceeded
    Minimum purchase amount of 0 is required
    1 Left in Stock
    Gotway MSuper Nose Stand Galaxy Black PETG

    Gotway MSuper Nose Stand Galaxy Black PETG

    Should fit any V3 or newer Msuper generation!
    Double sided tape and screws included
    Screw mount requires drilling into your case!
    Printed in stronger premium Prusament PETG
    Kickstand and "bumper" protection
    Filament used - 38 meters
    Print time total - 11 hours
    $19.99

    Gotway MSuper Nose Stand Galaxy Black PETG

    $19.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • Custom Order - Jaime

    Custom Order - Jaime

    $19.99
    Only use when instructed
    OUT OF STOCK
    Custom Order - Jaime

    Custom Order - Jaime

    Only use when instructed
    $19.99
    OUT OF STOCK

    Custom Order - Jaime

    $19.99
    OUT OF STOCK
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • EUC Stand 2.1 White

    EUC Stand 2.1 White

    $22.99
    Narrow version with 15CM Opening
    Best all around choice to fit most wheels (not Z10, 16X or KS14 Series)
    Total print time - 22 hours
    Filament used - 79 meters
    OUT OF STOCK
    EUC Stand 2.1 White

    EUC Stand 2.1 White

    Narrow version with 15CM Opening
    Best all around choice to fit most wheels (not Z10, 16X or KS14 Series)
    Total print time - 22 hours
    Filament used - 79 meters
    $22.99
    OUT OF STOCK

    EUC Stand 2.1 White

    $22.99
    OUT OF STOCK
    Successfully Added to your Shopping Cart
    Adding to Cart...
  • EUC Stand 2.1 Black

    EUC Stand 2.1 Black

    $22.99
    Narrow version with 15CM Opening - Best all around choice to fit most wheels (Not 16X, Z10 or KS14 Series)
    Total print time - 22 hours
    Filament used - 79 meters
    EUC Stand 2.1 Black

    EUC Stand 2.1 Black

    Narrow version with 15CM Opening - Best all around choice to fit most wheels (Not 16X, Z10 or KS14 Series)
    Total print time - 22 hours
    Filament used - 79 meters
    $22.99

    EUC Stand 2.1 Black

    $22.99
    Successfully Added to your Shopping Cart
    Adding to Cart...
1
2 3 4